Clarke IG1200 - Using Your Generator; Starting the Engine

13
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
USING YOUR GENERATOR
STARTING THE ENGINE
1. Remove all connections from the AC sockets.
2.
Hold the fuel tank cap so that it
will not move, and turn the air
vent knob to the ‘open’ position.
3. Turn fuel valve to the ON position
(pointing right).
4.
Set the engine switch to ‘ON’.
5. Move the choke lever to the right,
to the ‘Choke’ position.