L
Linda PetersonJul 27, 2025
What to do if the Clarke MA10 12E dirty water vacuuming is insufficient?
- KKelly HartmanJul 27, 2025
If you notice insufficient dirty water vacuuming with your Clarke Scrubber, several factors could be the cause. Start by checking if the recovery tank is full and empty it if necessary. Inspect the squeegee bars for dirt, wear, or damage, and clean them thoroughly. Also, ensure the inspection compartment is clean. Check the recovery vacuum hose to ensure it's properly connected and free from dirt. Finally, make sure the air filter is clean.