1.3 SAFETY INSTRUCTIONS
For your safety, before plugging in the welder, closely follow these
instructions:
• When working in a confined space, the welder must be
kept outside the welding area and the ground cable should be
fixed to the workplace. Never work in a damp or wet area, in
these conditions.
• Do not use damaged input or welding cables.
• The welding torch should never be pointed at the operator's
or another person's body.
• The welder must never be operated without its panels as
this could cause serious injury to the operator and could damage
the equipment.
1.4 FIRE PREVENTION
Make sure that appropriate fire prevention devices are available
near to the welding area;
All combustible material must be removed from the welding area.
1.6 ELECTRIC SHOCK
DANGER - ELECTRIC SHOCK CAN BE FATAL
Ifa person is found unconscious and electric shock is suspected,
do not touch the person ifthey are in contact with any electrical
wires. Disconnect power from the machine and then use First
Aid. Dry wood, and other insulating material can be used to move
electrical cables, if necessary, away from the person.
To Next Page
Loading...
Need help?
General
