9
English
TIMER – timer function
With the air conditioner turned on:
1. Press [ TIMER ] once. The OFF indicator will be illuminated. This indicates that
the timer’s automatic stop time function is activated. Set the desired stop time
by pressing or holding down [ Λ ] or [ V ].
2. Press [ TIMER ] once. The ON indicator will then come on. This indicates that
the timer’s automatic start time function is activated. Set the desired time by
pressing or holding down [ Λ ] or [ V ].
With the air conditioner turned off:
1. Press [ TIMER ] once. The ON indicator will then come on. This indicates that
the timer’s automatic start time function is activated. Set the desired time by
pressing or holding down [ Λ ] or [ V ].
2. Press [ TIMER ] once. The OFF indicator will be illuminated. This indicates that
the timer’s automatic stop time function is activated. Set the desired time by
pressing or holding down [ Λ ] or [ V ].
SLEEP – gradual cooling
Note: The sleep feature can only be activated with the air conditioner on and only
if the AUTO or COOL functions is selected.
1. Press [ SLEEP ]. The set temperature will be reduced by 1 ºC during
the first 30 minutes.
2. After another 30 min the temperature will be reduced by a further 1 ºC.
3. Thereafter the air conditioner will continue to reduce the temperature for
the next 7 hours and then return to the original set temperature.
Remote control operation
Note:
• The remote control has an 8-metre range. Point the remote directly at the air
conditioner making sure that there is no furniture or other objects obstructing
the remote’s signals from reaching the air conditioner.
• The signals from the remote can be blocked if the air conditioner’s IR sensor
is exposed to strong sunlight.
• Do not expose the remote control to persistent sunlight, blows or damp.
• Select ºC or ºF by holding down both [ Λ ] and [ V ] for 3 seconds.
AUTO
1. Connect the mains lead to a wall socket and make sure the red indicator
below [
] is lit.
2. Press [ MODE ] until AUTO is shown.
3. Press [ Λ ] or [ V ] to set the desired temperature.
4. Press [ ON/OFF ] to turn on the air conditioner. The air conditioner will automatically
maintain the set room temperature in this mode.
Note: If the AUTO function is selected you will not be able to set the fan speed.
To Next Page
Loading...
Need help?
General
