8 9
English
Changing theangle
Angle theprojector up or down to thedesired position.
Press and hold in [ ▲/Project ] to rotate theprojector
image, theimage will rotate through 90°. Repeat to rotate
theimage 180°, 270° and back to 0°.
Care and maintenance
Clean theproduct by wiping it with adamp cloth. Use only
mild cleaning agents, never solvents or corrosive chemicals.
Troubleshooting
The clock radio will
not switch on.
• Make sure that theadapter
and mains lead are intact
and undamaged.
• Make sure that themains
adapter and its lead are
properly connected both to
awall socket and theclock
radio.
• Is thewall socket energised?
No sound from
thespeakers.
• Check thevolume.
Poor or non-existent
radio reception.
The automatic FM
scan doesn’t work.
• Move theclock radio to
another location.
The set alarm does
not sound.
• Make sure that theclock
radio is set to thecorrect
time.
• Check that theset alarm is
activated.