-11-
MUTE SWITCH
This is a manual mute switch which completely cuts the preamp output in the MUTE ON
position. The PLAY position allows the signal to pass to the power amp. Caution: make sure the
MUTE ON position is engaged when making or changing any connections to the preamp. This includes
all inputs and outputs, as well as the A.C. linecord.
With optional remote control feature, switching between PLAY and MUTE can be done by
either manually pressing the MUTE switch down momentarily on the preamp or pushing the MUTE
button on the hand held unit. The PLAY (or MUTE OFF) and MUTE ON selections are indicated by the
STEADY RED or GREEN LED respectively at the preamp.
NOTE: WHEN THE PREAMP IS IN THE MUTE POSITION, AND THE VOLUME
CONTROL IS TURNED UP USING THE REMOTE CONTROL UNIT, THE PLAY MODE IS
AUTOMATICALLY SELECTED.
To Next Page
Loading...
