Turning the warewasher on
Loading the warewasher
Push the ‘ON’ button, the button will flash amber to indicate
pre-heating and water filling of the machine. You can continue
to prepare the machine whilst this process occurs.
Open the hood to load a basket. Before loading, ensure debris
is rinsed from the items. With the basket in place, close the
hood.
See the User Manual for loading information.
2
1
3
Selecting a wash program (optional)
If you do not require the default
program then choose your
desired program using the
SELECT button until the display
shows the program you require.
4
Confirming your selection
Cycle indicator will illuminate blue to show a program selection
has been made.
5
Warewasher start cycle
Once the temperature and water cycle is complete, the amber
START button will illuminate green and your program will start.
P500 P500A P500AS
P500AWS P500ASWS
Pass Through Warewasher
Quick User Guide
1.5 Mins
3 Mins
5 Mins
*
*
Default program
Caution
Only use this Quick User Guide after the
Warewasher has been fully commissioned.
See Section 5 in the User Manual.
To Next Page
Need help?
General
