12
Product Operation
C.Press the “ ” button twice in a short time, robot will go back to charging station for
charging.
Note:
A. In standby or working status, the robot will looks for c
harging docking automatically when
battery capacity is low.
B. During the process of looking for charging station, if the robot run out of power before arriving
the charging station, it will broadcast voice “Battery low, robot is shutting down” and shut
down within twenty minutes.
C. When the robot is in working status, you should “Pause” it first, let it “Standby”, then press
“Re-charge”.
In Order to Extend Battery’s Life
A. Please charge the robot up to 12 hours upon first charge.
B. Charge the robot as soon as possible when battery capacity is low to avoid causing
damages to the batteries capacity.
C. The robot will return to the charging station automatically when accomplished cleaning or
battery capacity is low.
D. When you will not use the robot for ab extended period of time, please fully charge the
battery, then switch off the robot and keep it in a cool but dry place.
E. If the robot has been put aside over 3 months, please charge the robot for 12 hours before
using it for cleaning.
To Next Page
Loading...
