16
Product Maintenance
Cleaning Side Brush
1. Check if side brush is broken or something is stuck under the
sidebrush by pulling it straight of the robot
2. Clean the side brush
3. If a side brush is curled, deformed or worn out then please replace
with new
Cleaning Dust Bin and Filters
Empty
and clean dust bin every time when you use it, cleaning steps as
below:
A. Wash the nylon primary filter after every cleaningsession (not the HEPA-filter)
B. Before installing the nylon primary filter make sure it is dry.
C. HEPA filter should be replaced if it has lost its shape or no longer fit tight against the filter
frame.
D. Recommended changing intervalls for the HEPA filter:
i. Once per month if the robot is vacuuming seven days a week
ii. Every other month if it is used 3-4 days per week
iii. Every four months if used less than once per week.
NOTE: Make sure the safety latch is rotated before re-installing the HEPA-filter and filterframe into the dustbin.
To Next Page
Loading...
