Clear-Com ENCORE MS-702 - Station Capacity and Connector Details; Front Panel Controls and Indicators List

MS-702 TWO-CHANNEL MAIN STATION
4-3
Mains Power
Input Voltage Range 100 - 240 VAC
Input Frequency Range 50 - 60 Hz
Input Power <= 60 VAC
Output Voltage 30 VDC ± 0.5V
Output Current per Channel (Continuous) 1.2 A
Output Current per Channel (Peak) 2 A (Do not exceed the 1.2A rating
for more than 2 seconds per 1
minute period)
Short Circuit Recovery Time (1st short) <= 0.5 sec
Short Circuit Recovery Time >= 20 shorts in 20sec) <= 20 sec
Station Capacity
Up to 40 RS-601 beltpacks or 10
speaker stations or 12 headset
stations distributed over both
channels
Rear Panel Connectors
Intercom: (6) XLR-3M (3 per channel)
Announce Out: (1) XLR-3M (audio)
Announce Relay: (1) 1/4 in. (0.64 cm) phone jack
(relay)
Program: (1) XLR-3F
Hot Mic / IFB Interface: (1) 1/4 in. (0.64 cm) phone jack
AC Power: IEC 320 connector
Rear Panel Controls
(2) Termination On-Off
switches
(8) Option switches
(1) Power switch
(1) Tone alert volume control
Front Panel Connectors
Panel Mic: (1) 1/4 in. (0.64 cm) panel
mounting jack
Headset: (1) XLR-4M
Front Panel Controls & Indicators
(1) Panel / headset mic switch
(1) Announce button
(1) Party line link button
(2) Program
ON-OFF-INTERRUPT
switches
(3) Program level controls
(2) Listen controls
(2) Sidetone null controls
(2) Talk buttons