Need help?Do you have a question about the Clear-Com FreeSpeak Edge and is the answer not in the manual?
General| Frequency Range | 1.9 GHz |
|---|---|
| Audio Channels | 4 |
| Number of beltpacks supported per transceiver | Up to 10 |
| Operating Temperature | 0°C to 40°C |
| Audio Input | XLR |
| Audio Output | XLR |
Explanation of safety symbols used in the manual.
Methods and considerations for selecting RF channels for optimal performance.
Explanation of DFS channels and their use with radar detection.
Mounting options and placement guidelines for the transceiver.
Network settings and IP address configuration for the E-IPA-HX card.
Linking FreeSpeak Edge transceivers to an Eclipse HX Digital Matrix.
Methods for registering beltpacks to the system using USB or OTA.
Methods of powering the transceiver, including PoE and local power.
Procedure for performing a factory reset on the transceiver.
Methods for updating transceiver firmware via matrix or USB.
Methods for updating beltpack firmware via USB or Over-The-Air.
Technical specs for beltpack audio, battery, hardware, and headset.
Technical specs for transceiver RF, power, mounting, and environmental.
FCC compliance statement and operational restrictions.
Crucial safety precautions for handling, using, and charging batteries.
To Next Page
