FreeSpeak Edge | User Guide
3.7 Wireless Regulatory Region (WRR)
The WRR defines the allowed channels, DFS functionality and RF power limits that are
available to the FreeSpeak Edge system according to its regional regulatory requirements.
5 GHz channel use must comply with regional regulations. Each transceiver has a fixed WRR
setting and cannot be changed by the user or any third-party. WRR settings must also be
configured in the EHX software by system preferences.
If the configurable WRR setting in the EHX software does not match the fixed WRR of the
transceiver, the system will not work and audio cannot be transmitted. The transceiver will
show a red or amber status LED and the EHX system will flag the error.
To see the error message navigate to the monitoring screen in EHX. This message is also
available in transceiver properties.
To view the WRR setting, navigate to Matrix>configuration>preferences>wireless beltpacks
Page 20
To Next Page
Loading...
Need help?
General
