FreeSpeak Edge | User Guide
software navigate to: Matrix>Configuration>Preferences>Menu Access Code. If you change
the menu access code in the configuration software, you must Apply Map to Matrix for the
change to take effect.
Note: The various levels of menu access are described in FreeSpeak Edge beltpack menus on page
56.
6.8 FreeSpeak Edge beltpack menus
FreeSpeak Edge beltpacks can be configured from the device menu system. The variables you
can program from the beltpack are shown below.
Note: Menu options can be set to 4 different levels: advanced, normal, basic and none.
Note: Menu access levels can be changed from the beltpack menu (under Administration) or from the
configuration tool (EHX). To change menu level access from the beltpack you need your
system administration code (default: 4632). To find the system administration code navigate
to: EHX>Matrix>Configuration>Preferences>System Access Codes.
6.8.1 Advanced menu options
The following tables list the Advanced menu options.
Speaker
Menu item Description
On/off
Speaker On allows the beltpack to be used
without the headset with simplex (one way)
audio. The beltpack is used like a walkie-
talkie.
Speaker Off returns audio to the headset
(usually duplex, depending on configuration).
Page 56
To Next Page
Loading...
Need help?
General
