Clear-Com FreeSpeak II Quick Start Guide

Quick Start Guide | FreeSpeak II™ IP transceiver
Page 3 399G250 Rev B July 27
th
2018
Fig 3 Example IP settings.
2) If you change the card IP addresses you must Apply Map to Matrix.
3) In the EHX software, ensure that at least one beltpack has been allocated. EHX>Hardware>Cards
and Ports>+ Port (green button). Once beltpacks have been allocated in EHX, you will see the
Tranceivers button.
Note: Beltpacks must be already registered to the system and have a Role assigned to them before they can be
used with the transceivers. See the FreeSpeak II Integra User Guide if you need more information.
4) Apply power to the IPT(s).
5) Detect IP transceivers. Navigate to EHX>Hardware>Transceivers and click Detect IP TCVR

Clear-Com FreeSpeak II Specifications

General

Brand	Clear-Com
Model	FreeSpeak II
Category	Intercom System
Language	English