What’s in the box:
BaseStation
● CM-944 series BaseStation
● Power Cord
● Omni-directional whip antenna
● 3.5mm to 3.5mm 3 conductor data pairing cable
» Used to pair a BaseStation to the BeltStation(s)
● USB-A to USB-B cable
» Used to update BaseStation rmware
● USB-A to Mini-USB
» Used to update BeltStation rmware
● BaseSync cable
» Used if you have more than one BaseStation
» Improves RF performance when using multiple systems
● CD with manual, T-Desk software
BeltStation
● CP-942 series BeltStation
● Li-Poly rechargeable battery
● 5VDC wall charger with Mini-USB connector
Remote Transceiver (optional)
● Remote RF transceiver
● RJ-45 to RJ-45 CAT-5 cable
● Omni-directional whip antenna
● Mounting Plate and screws
5 Bay Battery Charger (optional)
● Battery Charger
● AC Cable
Note: Charge ALL BeltStation batteries prior to set-up.
What else you may need:
● Headset, one for each user; may be dynamic or electret
microphone, with a 4-PIN XLR female connector
● 3-PIN XLR cables to connect to external 2-Wire Intercom
system
● RJ-45 cables to connect to external 4-Wire Intercom
system
● RJ-45 cable to connect to PC for T-Desk LAN control
Tempest
®
900
399G080 Rev A 15 July-2014
4-Channel QuickStart Guide
To Next Page
