Made in Germany 3
CE-MARKING
EQUIPMENT MAINS SETTING
Your Clearaudio product has been prepared to comply with the household power and safety
requirements that exist in your area.
This product can be connected to 230 V or 110 V AC (50 Hz and 60 Hz).
The Clearaudio
concept active
meets relevant regulations concerning electromagnetic
disturbance (EMC) and low-voltage appliances.
Dear Clearaudio customer,
Thank you for purchasing the Clearaudio
concept active
turntable package.
The
concept active
turntable features an integrated Clearaudio phonostage and headphone output.
The
concept active
package is available with either our frictionless, magnetic bearing concept tonearm
or our award-winning, direct-wired Satisfy Kardan Aluminium tonearm. The package is completed
with a choice of either the concept V2 MM or the concept mc cartridge.
All of the
concept active’s
key parameters - from tracking force to anti-skating - are ne-tuned as
part of the manufacturing process, leaving you nothing to do but sit back and enjoy.
Please read this instruction manual carefully to ensure correct and easy setup, to avoid any potential
damage and hence voiding of your warranty, and to discover how to care for your
concept active
to
ensure many years of high performance.
We wish you a much musical enjoyment with your new Clearaudio
concept active
turntable.
Clearaudio electronic GmbH
The following section must be read before any connection to the mains power supply.
To Next Page
Loading...
