Do you have a question about the Clearaudio concept active and is the answer not in the manual?
Placing the turntable chassis on a suitable surface.
Attaching the drive belt around the sub-platter and motor pulley.
Carefully placing the turntable platter onto the central shaft.
Removing adhesive security tape from the tonearm and cartridge.
Ensuring the turntable is perfectly level using the provided gauge.
Adjusting the turntable feet for a perfectly level position.
Connecting the external power supply to the turntable and AC outlet.
Guidance on setting the correct tracking force for the cartridge.
Information regarding tonearm height adjustment procedures.
Details on how to adjust the anti-skating force for proper playback.
On/off switch for the subsonic filter.
Adjustment of the amplification factor according to cartridge type.
Choosing between MM and MC cartridge input modes.
Selecting passive, variable, or active output signal modes.
Connecting the grounding wire to prevent humming noises.
Placing the turntable chassis on a suitable surface.
Attaching the drive belt around the sub-platter and motor pulley.
Carefully placing the turntable platter onto the central shaft.
Removing adhesive security tape from the tonearm and cartridge.
Ensuring the turntable is perfectly level using the provided gauge.
Adjusting the turntable feet for a perfectly level position.
Connecting the external power supply to the turntable and AC outlet.
Guidance on setting the correct tracking force for the cartridge.
Information regarding tonearm height adjustment procedures.
Details on how to adjust the anti-skating force for proper playback.
On/off switch for the subsonic filter.
Adjustment of the amplification factor according to cartridge type.
Choosing between MM and MC cartridge input modes.
Selecting passive, variable, or active output signal modes.
Connecting the grounding wire to prevent humming noises.
| Brand | Clearaudio |
|---|---|
| Model | concept active |
| Category | Turntable |
| Language | English |










