Operation instruction for tonearm counter weight
(concept MM MC /wood with gimbal-mounted bearing)
With the concept MM / MC (Wood) you received a Plug & Play turntable.
However for security reason you will nd the counter weight for the tonearm separately packed.
1. To install the counter weight, please push it with pressure, but also carefully, on the shaft up to
the black marking ring (see picture 1, 2 and 3). Please hold tight the tonearm tube when you push
the counter weight onto the shaft!
Pic. 1: Delivery condition as supplied to
customer (without installed counter weight)
Pic. 2: Installing the counter weight
Pic. 3: Final position of the counter weight
2. Please adjust tracking force with the delivered Smart Stylus gauge
For Clearaudio cartridge Moving Magnet (MM) is the tracking force= 2.4 g
For Clearaudio cartridge Moving Coil (MC) is the tracking force = 2.2 g
Operation instruction Smart Stylus gauge:
To adjust the tracking force of the cartridge, please follow the instructions provided:
✓
tracking force too high!
tracking force too low!
This position of the diamond
correlates to a tracking force of
20 mN (2.0g).
concept MM/MC Package
© clearaudio electronic GmbH, 2017/08 Made in Germany
To Next Page
Need help?
General
