Need help?Do you have a question about the Clearaudio Tracer and is the answer not in the manual?
Recommendations for tonearm care during periods of inactivity to prevent sticking.
Guidelines for safely packing and transporting the tonearm using original materials.
Procedures for obtaining service or repair for Clearaudio products.
Instructions for proper product disposal and essential safety precautions for use.
Steps for mounting the tonearm base on Clearaudio Performance DC or Ovation models.
Steps for mounting the tonearm base on Clearaudio Innovation series turntables.
Guide for installing the clamping ring on tonearm bases of non-Clearaudio turntables.
How to adjust the Vertical Tracking Angle (VTA) for accurate stylus-to-groove contact.
Instructions for aligning the phono cartridge and setting its position on the headshell.
Method for setting the correct downward tracking force for the installed cartridge.
Steps to adjust the azimuth (vertical stylus angle) for precise channel balance.
How to set the anti-skating force based on the cartridge's tracking force.
Recommendations for tonearm care during periods of inactivity to prevent sticking.
Guidelines for safely packing and transporting the tonearm using original materials.
Procedures for obtaining service or repair for Clearaudio products.
Instructions for proper product disposal and essential safety precautions for use.
Steps for mounting the tonearm base on Clearaudio Performance DC or Ovation models.
Steps for mounting the tonearm base on Clearaudio Innovation series turntables.
Guide for installing the clamping ring on tonearm bases of non-Clearaudio turntables.
How to adjust the Vertical Tracking Angle (VTA) for accurate stylus-to-groove contact.
Instructions for aligning the phono cartridge and setting its position on the headshell.
Method for setting the correct downward tracking force for the installed cartridge.
Steps to adjust the azimuth (vertical stylus angle) for precise channel balance.
How to set the anti-skating force based on the cartridge's tracking force.
General| Type | Turntable |
|---|---|
| Overhang | 17.3 mm |
| Drive System | Belt Drive |
| Speed | 33 ⅓ rpm, 45 rpm |
| Speeds | 33 ⅓ rpm, 45 rpm, 78 rpm |
| Cartridge | Optional |
| Effective length | 239.3 mm |
To Next Page