Cleaver-Brooks Profire E Series - CHAPTER 2 Installation; 2.3 Combustion Chamber Recommendations and E Refractory Dimensions; 2.4 Installation; 2.6 Typical Oil Supply Loop

ii
750-297
Profire E/LNE Series Manual
2.3 — Combustion Chamber Recommendations and E Refractory Dimensions 2-2
2.3.1 — Watertube Boiler Dimensions 2-2
2.3.2 — Firetube Boiler Dimensions 2-3
2.4 — Installation 2-5
2.4.1 — General 2-5
2.4.2 — Refractory Dry Oven 2-5
2.5 — Separate Compressor Module 2-7
2.6 — Typical Oil Supply Loop 2-7
2.7 — Oil Circulating Loop Operation 2-8
2.8 — Circulating Oil Pump 2-11
2.9 — Back Pressure Valve 2-11
2.10 — Gas Piping 2-11
2.11 — Installation Checklist 2-12
CHAPTER 3 Operation 3-1
3.1 — Preparations for Starting 3-1
3.1.1 — Oil Flow 3-2
3.1.2 — Oil Pressure 3-2
3.1.3 — Firing Preparations for Oil Burners 3-2
3.1.4 — Firing Preparations for Gas Burners 3-2
3.2 — Electrical Interference Test 3-2
3.2.1 — Gas Fired 3-3
3.2.2 — Oil Fired 3-3
3.3 — Gas Pilot Flame Adjustment 3-3
3.4 — Startup Sequence 3-3
3.5 — Automatic Shutdown 3-4