Clek Oobr - Seat Cushion Installation and Washing; Installing the Seat Cushion; Washing Instructions; Seat Cushion Cover Washing Guidelines

6261
To Install Seat Cushion:
Step 1.
Place Seat Cushion onto top surface
of Seat Base.
Step 2.
Slide Seat Cushion rearward underneath
Seat Back to align snaps in Seat Base,
as shown in Figure 86.
Step 3.
Press down on rear and front of Seat
Cushion to engage front snaps to
Seat Base.
Figure 86
Washing Instructions
SEAT CUSHION COVER WASHING INSTRUCTIONS
Step 1.
Once the Seat Cushion Cover is removed, set the foam pad aside. DO NOT wash
foam pad.
Step 2.
Follow washing instructions on wash tag located on inside of Seat Cushion Cover.