CLASSIC BLAST MACHINE with TLR-100/300 REMOTE CONTROLS Page 30
© 2018 CLEMCO INDUSTRIES CORP. www.clemcoindustries.com Manual No. 22501, Rev. I 02/18
8.7 Remote Control System Parts, Figure 31
Item Description Stock No.
1. Outlet valve, 1" piston ................................ 01967
2. Outlet valve, 1" diaphragm ......................... 03371
3. Inlet valve
1" NPT ..................................................... 01980
1-1/2" NPT .............................................. 01995
4. Abrasive trap .............................................. 02011
5. RLX control handle ..................................... 10565
6. Hose, 3/16" x 18 inch, coupled ................. 02454
7. Hose, 5 foot twinline, coupled ................... 01952
8. Hose end, reusable ................................... 01943
9. Hose, 50 foot twinline, coupled ................. 01951
10. Union, hose ................................................ 01944
11. Elbow, 1/4" NPT adaptor ........................... 02513
Figure 31
8.8 ACS System Replacement Parts, Figure 32
NOTE: All parts not shown are the same as those shown
in Section 8.7, and Figure 31. Refer to the RLX manual
for replacement parts for ACS parts. Refer to the
metering valve manual for metering valve replacement
parts.
Item Description Stock No.
1. RLX control handle w/ ACS switch............. 07625
2. Hose, 50-foot single-line, coupled ............. 03087
3. Hose, 3/16" x 18", coupled ........................ 02454
4. Union, twinline hose .................................. 01944
5. Elbow, 1/4" NPT adaptor ........................... 02513
Figure 32
3
5
4
1
5
1
2
3
4
10
11
7
9
6
8
2
Metering valve shown
for reference.
To Next Page
Loading...
