CLEOPATRA Complete Wellness - Menu Programs

31
9.4 Menu description
In the following description, all functions to be controlled via the Poolmaster remote, are
described. If your whirlpool with individual functions has not been performed, these functions will
not be shown in the display of the Poolmaster and are therefore not available.
9.4.a M e n u “Programs”(A)
Inthe“Programs”menuyoucancallupandactivatethepre-programmedandnon-adjustable
Whirlpools programs.
Control
Callup“Programs”inMenulevel1andchangeinthe“Programs”menubypressingbutton1.The
desired Welness program can be selected and activated.
43
Deutsch
0
Programme
Auswahl
0
Programme
Relax
ZurückStart
0
Programme
Sport
ZurückStart
0
Programme
Wave
ZurückStart
0
Programme
Massage
ZurückStart
E
English
0
Programs
Choice
0
Programs
Relax
BackStart
0
Programs
Sport
BackStart
0
Programs
Wave
BackStart
0
Programs
Massage
BackStart
Nederlands
0
Programma
Keuze
0
Programma
Relax
TerugStart
0
Programma
Sport
TerugStart
0
Programma
Wave
TerugStart
0
Programma
Massage
TerugStart
43
Deutsch
0
Programme
Auswahl
0
Programme
Relax
ZurückStart
0
Programme
Sport
ZurückStart
0
Programme
Wave
ZurückStart
0
Programme
Massage
ZurückStart
E
English
0
Programs
Choice
0
Programs
Relax
BackStart
0
Programs
Sport
BackStart
0
Programs
Wave
BackStart
0
Programs
Massage
BackStart
Nederlands
0
Programma
Keuze
0
Programma
Relax
TerugStart
0
Programma
Sport
TerugStart
0
Programma
Wave
TerugStart
0
Programma
Massage
TerugStart
9.4.bMenu“Functions“
The various functions of the whirlpool can be switched on and set manually in the menu functions.
The settings will be lost after switching off. To save the settings, these must be stored under the
‘User’1,2,3or4menu.
9.4.c Menuuser1‘, ‚user2‘, ‚user3‘, ‚user4‘
Upto4peoplecansavetheirwhirlpoolsettingsinthemenu,‘user1touser4’. Theindividual
functions of the whirlpool can manually set and turned on or off. The selected settings are also
saved after turning off the whirlpool and can be called up, changed or started at any time.
Control
Call“Functions”(A)inmenulevel1andpassthroughitbypressingbutton1inthe“Functions”
menu. The desired functions of the whirlpool can be activated and switched on.
Program‚`Relax‘(B)
Duration is approximately 20 minutes.
Program`Sport‘(C)
Duration is approximately 15 minutes.
Program‚`Wave‘(D)
Duration is approximately 15 minutes.
Program‚`Massage‘(E)
Duration is approximately 12 minutes.