Shenzhen Clever Electronic Co., Ltd
5
4.1.4 User-defined alarm: when thresholds of total current, individual current (A&C series not included) or
temperature and humidity are exceeded
4.1.5 System default alarm: when the total rating current, individual rating current (A&C series not included)
are exceeded or temperature and humidity threshold are exceeded.
4.1.6 Various alarm methods: Buzzer sounds, Alarm indicator flashes, value displayed in red from Web
interface, the value flashes in red from LCD screen, alarm logs, E-mail notification and SNMP trap
4.1.7 User management: User permission configuration. (User can be set as administrator or normal user )
4.1.8 Access methods: Web Interface, Telnet command line, Modbus, SNMP (v1 / v2c / v3), Serial console,
4.1.9 LCD screen Energy-saving mode and mute-alarm-buzzer are supported.
4.1.10 Support multi-user operation system, Multi-browser compatible and remote software update.
4.1.11 MPDU A/B/C/D series function table
4.2 Product picture and description
Monitoring function: Through the local LCD screen user can view the
current/voltage/energy consumption/power at input level or individual outlet
level(A&C series not included), temperature/humidity status, band rate, serial
communication address, device series, IP address.
Outlet switching function (A&B series not included): switching on/off each
individual outlet or all outlets, set up the power on/off delay, reset power
consumption at input or outlet level.
Keeping the former status（A&B series not included）:keep the former state of
each outlet after restart
User-defined alarm: when thresholds of the input voltage, total current or
individual current(A&C series not included), temperature and humidity are
exceeded
System default alarm: when the total rating current, individual rating
current(A&C series not included) or temperature/humidity threshold are
exceeded
To Next Page
Loading...