Follow the precautions below to ensure that your product is used and set up correctly.
Failure to do so could result in serious injury or damage to your property. Please read and
follow the instructions. Keep the instruction manual in a safe place for future reference.
DROWNING AND SAFETY INFORMATION
• RISK OF ACCIDENTAL DROWNING. Children are forbidden from using the CleverSpa
®
unless they are supervised
at all times by a responsible adult.
• DANGER — Risk of Accidental Drowning (especially children under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be reached by adult supervisor securing the means of access
or installing a safety protection device to the spa. To avoid accidents during spa use, ensure that children are kept
under constant adult supervision.
• RISK OF ELECTRIC SHOCK. Never operate any external/additional electrical appliance when in the CleverSpa
®
or when your body is wet. Keep electrical appliances away from the CleverSpa
®
.
• RISK OF STATIC SHOCK. The PVC liner of the tub, touching or rubbing against surfaces such as the ground
sheet or artificial grass, can cause electrons to build up a negative charge on the liner material. Since plastics
are insulators, they are poor conductors of electricity. Electrical charges tend to build up on the surface
of insulators resulting in static electricity. When touched by a human this can cause a static shock. Static
electricity cannot seriously harm you.
• Any damage to electrical cables should be replaced by a competent party immediately before further use.
• When not in use, cover should be fitted and locked to help retain heat. This also prevents unsupervised children
accessing the CleverSpa
®
.
• Pets should be kept away from your CleverSpa
®
at all times.
• DO NOT USE AN EXTENSION CABLE as this can be a fire risk. We suggest using an external mains socket that
is weather proofed, fitted by a qualified electrician.
• DO NOT OVERLOAD THE HOT TUB PLUG SOCKET. Short circuits can cause loss of power due to overloading
of the socket and potentially melt the wiring, which can lead to an electrical fire or irreparable damage to the
socket and any appliances connected to it.
• Appliance should be supplied through a residual current device (RCD/GFCI type) with a rated tripping current
not exceeding 30mA.
• Ensure the hot tub plug inserts fully into the plug socket, fitting tightly and flat into the socket and wall to avoid
arcing and overheating, which could cause the socket to crack or melt.
• Check your mains socket and RCD plug to ensure there is no visible damage or standing water before using.
• To avoid accidental resetting of thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly switched on and o by the utility.
• If using an outdoor power socket please ensure that it features a weatherproof protective cover, that shuts fully
and securely.
• Ensure that your power socket and its surrounding location is free from damp, condensation or any water ingress.
Water within an electrical socket can rapidly increase the current flowing through the circuit, which could cause
a short circuit as the fuse is blown.
• Do not turn CleverSpa
®
on when it is empty. This could cause irreparable damage to pump system which would
nullify any warranty period. Ensure water is at the minimum line prior to switching on.
04
SAFETY PRECAUTIONS - READ CAREFULLY!
IMPORTANT!
Do not obstruct water outlet.
This can damage the motor.
To Next Page
Loading...
