Clevo D900K - Removing the Optical (CD;DVD) Device

Disassembly
2 - 6 Removing the Optical (CD/DVD) Device
2.Disassembly
Removing the Optical (CD/DVD) Device
1. Turn off the computer, and turn it over and remove the battery (page 2 - 5).
2. Locate the hard disk bay cover and remove screws - , and remove the bay cover .
3. Remove screw .
4. Use the screwdriver to push the optical device out of the computer at point .
5. Reverse the process to install the new device.
Figure 2
Optical Device
Removal
a. Remove the screws and
remove the cover.
b. Remove the screw.
c. Push the optical device
out of the computer at
point 8.
1 4
5
6
7
8

5. Hard Disk Bay Cover
7. Optical Device
•5 Screws
1
2
7
a.
b.
c.
4
3
8
6
5