Clevo ITAUTEC W244HUQ Series - Removing and Installing the ODD Bezel

Disassembly
Removing and installing the ODD Bezel 2 - 9
2.Disassembly
Removing and installing the ODD Bezel
1. Turn off the computer, remove the battery and remove the ODD(page 2 - 5).
2. Carefully unsnap the ODD Bezel
from ODD in the direction of the arrow .
3. Snap the bezel onto the ODD at points and .
Figure 5
ODD Bezel
a. Unsnap the ODD Bezel
in the direction of the ar-
row .
b. Snap the bezel onto the
ODD at points and
.
2
3
4
1
2
1
a.
2
3
4
b.
4
3

1. ODD Bezel