Clevo N550RN - Page 33

Disassembly
Removing the Hard Disk Drive 2 - 9
2.Disassembly
4. Slightly lift and pull the hard disk assembly in the direction of arrow (Figure 5c).
5. Lift the hard disk assembly out of the bay (Figure 5d).
6. Remove screws - and bracket from the hard disk (Figure 5e).
7. Reverse the process to install a new hard disk (do not forget to replace the screws).
3
4
5
6
7
8
9
c.
6
4
3
e.
d.
5
7
8
9

4. HDD Assembly
8. Bracket
9. HDD
•2 Screws
Figure 5
HDD Assembly
Removal (cont’d.)
c. Slightly lift and pull the
HDD in the direction of
the arrow.
d. Lift the HDD assembly
out of the bay.
e. Remove the screws and
bracket from the HDD.