Clevo N750BU - Removing and Installing the M.2 SSD Module

Disassembly
2 - 16 Removing and Installing the M.2 SSD Module
2.Disassembly
Removing and Installing the M.2 SSD Module
m.2 SSD Removal Procedure
1. Turn off the computer, turn it over to remove the battery (page 2 - 5) and bottom cover (page 2 - 7).
2. The M.2 SSD module will be visible at point on the mainboard (Figure 10a).
3. Remove the screw
(Figure 10b)
4. The M.2 SSD module (Figure 10c) will pop-up, and you can remove it from the computer.
1
2
3
b.
c.
a.
2
3
1
3

3.M2 SATA-1 Module
•1 Screw
Figure 10
M.2 SSD Module
Removal
a. Locate the M.2 SSD.
b. Remove the screw.
c. The M.2 SSD module
will pop up.