Need help?Do you have a question about the Clevo P751DM-G and is the answer not in the manual?
Details specific power requirements and precautions for the computer.
Provides critical safety precautions to prevent fire, electric shock, and injury.
Lists essential safety guidelines for handling and using the computer's battery.
Warns users about safety procedures before undertaking upgrade tasks.
Gives step-by-step instructions for initial setup and powering on the computer.
Details technical specifications for CPU, LCD, Video Adapters, BIOS, and Memory.
Introduces the chapter on disassembling the notebook computer's parts and subsystems.
Guides users through the steps to remove primary system memory modules.
Continues the procedure for removing RAM modules, including disconnecting ribbon cables.
Provides step-by-step instructions for installing a new CPU, including thermal grease application.
Provides steps for installing an M.2 SATA module, including thermal pad placement.
Guides users on how to install a new video card, ensuring proper alignment and connection.
Outlines the sequence of disassembly procedures and their corresponding page numbers.
Continues the step-by-step instructions for removing hard disk drive assemblies.
Continues the instructions for removing RAM modules, including handling latches.
Guides users through the complete process of removing and installing the CPU.
Explains how to remove the wireless LAN module, including cable disconnection.
Provides step-by-step instructions for removing the mainboard assembly.
Provides detailed, step-by-step instructions for safely removing the computer's battery.
Details the steps for unlocking and lifting the CPU from its socket.
Details the procedure for removing and installing the video card.
Provides essential precautions to avoid personal injury and computer damage during service.
Explains the procedure for removing and replacing the hard disk drive.
Details the process for removing the M.2 Solid State Drive module from the computer.
Provides steps for accessing and removing RAM modules located beneath the keyboard.
Guides users through removing the M.2 SATA module from the computer.
Provides the schematic for the Channel A, DIMM 0 DDR4 memory interface.
Shows the schematic for the main Embedded Controller (EC) IT8587.
Illustrates the schematic connections for DDR4 memory channels.
Provides the schematic for the Channel A, DIMM 1 DDR4 memory interface.
Provides the schematic for the TPS65982 IC, managing USB Type-C power delivery.
Shows the schematic for VCore and VCCGT power rail generation.
Illustrates the overall system architecture and interconnections of major components.
Depicts the power delivery network and associated components for the processor.
Provides the schematic for the Channel B, DIMM 0 DDR4 memory interface.
Provides the schematic for the VCore output stage, including power MOSFETs and inductors.
Provides the schematic for the Channel B, DIMM 1 DDR4 memory interface.
Shows the schematic for the Thunderbolt controller, including interface and configuration signals.
Provides instructions on using flash utility in DOS to update the BIOS.
Guides users on restarting the computer and loading default BIOS settings after the update.
To Next Page
General
