Clevo W25CEV - Page 42

Disassembly
2 - 18 Removing and Installing the Mainboard
2.Disassembly
Mainboard Installation Procedure
1. Insert the mainboard by holding it at an angle and making sure that the ports are aligned with the bottom case
(Figure 14a).
2. Tighten the screws
- (Figure 14b) on the mainboard.
3. Make sure that the mainboard switch is aligned with the WLAN knob slot (Figure 14c).
4. Replace the keyboard (page 2 - 16), ODD (page 2 - 15), CPU (page 2 - 10), RAM (page 2 - 8), HDD (page 2 - 6),
and battery (page 2 - 5).
1
2
4
5
6
b.
a.
3
2
4
1
c.
6
5

1. Mainboard
•3 Screws
Figure 14
Mainboard Module
Installation
a. Insert the mainboard.
b. Tighten the screws.
c. Align the mainboard
switch with the WLAN
slot.