Clevo W515GU - Removing the Wireless LAN Module

Disassembly
Removing the Wireless LAN Module 2 - 11
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, remove the battery (page 2 - 5), keyboard (page 2 - 6), and bottom case (page 2 - 7).
2. Carefully disconnect cables & , then remove screw from the module socket (Figure 7a
).
3. The Wireless LAN module (Figure 7b) will pop-up.
4. Lift the Wireless LAN module (Figure 7c) up and off the computer.
Figure 7
Wireless LAN
Module Removal
a. Disconnect the cables
and remove the screw.
b. The WLAN module will
pop up.
c. Lift the WLAN module
out.
Note: Make sure you re-
connect the antenna ca-
ble to ‘’1’’ + ‘’2’’socket
(Figure 7a). (See over-
leaf)
1
2
3
4
4
4
3
a.
1
2
4
c.
b.

4. WLAN Module.
•1 Screw