Clevo W515GU - Removing the 4 G Module

Disassembly
Removing the 4G Module 2 - 13
2.Disassembly
Removing the 4G Module
1. Turn off the computer, remove the battery (page 2 - 5), keyboard (page 2 - 6), and bottom case (page 2 - 7).
2. Carefully disconnect cables & , then remove screw from the module socket (Figure 8a
).
3. The 4G module (Figure 8b) will pop-up.
4. Lift the 4G module (Figure 8c) up and off the computer.
Figure 8
4G Module Removal
a. Disconnect the cables
and remove the screw.
b. The 4G module will pop
up.
c. Lift the 4G module out.
Note: Make sure you re-
connect the antenna ca-
ble to ‘’1’’ + ‘’2’’socket
(Figure 8a). (See over-
leaf)
1
2
3
4
4
4
3
a.
1
2
4
c.
b.

4. 4G LTE Module.
•1 Screw