Control Center
B - 4 Control Center
B
Power Status /
The Power Status icon will show whether you are currently powered by the battery, or by the AC/DC adapter
plugged in to a working power outlet. The power status bar will show the current battery charge state.
Brightness
The Brightness
icon will show the current screen brightness level. You can use the dial to adjust the screen brightness, or you
can use the Fn + F8/F9 key combinations.
PC Camera/Touchpad/Left Windows Key
Click these buttons to toggle the PC Camera or Touchpad power status, or to turn the Left Windows Key func-
tionality on/off. The button under the icon will appear highlighted when it is enabled.
Note that the power status
of the camera module is also effected by the Power Mode selected (see “Power Modes” on page B - 3).
Fan Speed
You can set
the fan speed to Maximum (full power), Automatic or Silent (the system can override the Silent fan if re-
quired) from this menu item. The fan speed will adjust itself automatically to control the heat of the CPU. How-
ever you can adjust the setting to maximum if you prefer. You can use the Offset slider to adjust the settings to
your preference, however these settings can be overridden by the system as a safety precaution, if it requires
heavier use of the fan.
To Next Page
Loading...
