Inserting the Battery - Model A 1 - 17
Quick Start Guide
1
Inserting the Battery - Model A
1. Slide the battery straight into the compartment (note that there are grooves on the side of the battery which
should align up with the battery compartment).
2. Lock
should lock automatically into place upon insertion.
3. Lock the battery in place by sliding latch in the direction of the arrow
.
1
2 3
Bottom Cover Removal
Warning
Do not remove any cover(s)
and /or screw(s) for the pur-
poses of device upgrade as
this may violate the terms of
your warranty.
If you need to replace/re-
move the hard disk/RAM/
optical device etc., for any
reason, please contact your
distributor/supplier for fur-
ther information.
Figure 1 - 10
Battery Insertion
To Next Page
Loading...
