Inserting the Battery - Model B 1 - 19
Quick Start Guide
1
Inserting the Battery - Model B
1. Insert the battery by aligning the battery with the pins & .
2. Turn the battery in the direction of the arrow .
3. Lock the battery in place by sliding latch in the direction of the arrow
.
1
2 3
Bottom Cover Removal
Warning
Do not remove any cover(s)
and /or screw(s) for the pur-
poses of device upgrade as
this may violate the terms of
your warranty.
If you need to replace/re-
move the hard disk/RAM/
optical device etc., for any
reason, please contact your
distributor/supplier for fur-
ther information.
Figure 1 - 12
Battery Insertion
4
4
1
5