20
English
Full Color “Per Key” LED Keyboard
You can change the colors for individual keys on the full
color “Per Key” LED Keyboard. The LED Keyboard ap-
plication can be accessed by clicking LED Keyboard in
the Control Center (or by pressing the Fn plus key)
or from the Start menu in Windows .
Figure 14 - LED Keyboard Application
The keyboard LED may be configured using the Fn + key
combination outlined in the table below.
Table 4 - Keyboard LEDs
LED Mode - Keyboard
Click Keyboard, on the left under LED Mode, to set in-
dividual color settings for any keyboard keys you may
wish to highlight.
Simply click to highlight any keys to which you wish to
apply the color, and then click a color from the color
swatch to apply the color. To highlight further keys first
click to deselect any previously selected keys, then repeat
the above procedure. To clear settings click Restore.
LED Mode - Keyboard Effect
Click on Keyboard Effect (under LED Mode) and then
click any of the Effect buttons to view the effects on the
keyboard. You can also adjust the LED Speed for the ef-
fects from the buttons on the right. Some effect colors can
set to Random or Custom.
Table 5 - Keyboard Effects
Keyboard LED Function key Combinations
Fn +
Launch the LED Keyboard
Application
Fn +
Toggle the Keyboard LED
On/Off
Fn +
Keyboard LED Illumination
Decrease
Fn +
Keyboard LED Illumination
Increase
On boot the key-
board will mo-
mentarily flash.
You can click in
the Override
Boot Effect
check box to
disable the key-
board flashing
effect as the
system boots.
Wave Breath
Scan Blink
Random Ripple
Snake
X170SM-G.book Page 20 Monday, June 29, 2020 11:14 AM
To Next Page
Loading...
