Climbing Technology ALPINE UP - Click-Up Mode: Safety in Case of Error; Click-Up Mode: Top Rope Belaying; Top Rope Belaying Setup and Operation

Climbing Technology by Aludesign S.p.A. via Torchio 22
24034 Cisano B.sco BG ITALY www.climbingtechnology.com
4/24
IST12-2D651CT_rev.8 10-21
6.1
WARNING!
6.2
SAFE LOWERING
6.3
WARNING!
6.4
SAFE LOWERING
Alpine Up is positioned
correctly but the rope is in-
serted in a wrong way: stop
immediately the ascent!
Place the rope in the braking
groove A, accompany it
towards the device with both
hands and lower the climber.
Alpine Up is positioned in-
correctly and the rope is in-
serted in a wrong way: stop
immediately the ascent!
Place the rope in the braking
groove A, accompany it
towards the device with both
hands and lower the climber.
6
CLICK UP MODE
SAFE, EVEN IN CASE OF ERROR
NO!
Even if the device is in the locked position, always hold the free end
of the rope in your hand!
7.1
SETUP
7.2
BELAYING
7.3
WARNING!
Before starting climbing,
take up slack (Fig. 5.2)
and activate the device in
lock mode.
With one hand pull and feed the
free end of the rope through the
device, with the other pull the
climber’s rope towards it.
During the belaying (7.1 - 7.2)
always hold the free end of the
rope in your hand!
7
CLICK UP MODE
BELAYING IN TOP ROPE