Clint ODIN User Manual

You have a few options to connect
ODIN to your network
Back side of ODIN.
CONNECTING TO NETWORK
You can also share your Wi-Fi settings
from your iOS device (ex. iPhone/
iPad).
1. Connect your iOS device to the
USB port on ODIN. (Make sure both
devices are powered on and that your
iOS device is unlocked).
2. Press the Wi-Fi setup button on
the back side of ODIN and choose
“Allow” on your iOS device to share
your Wi-Fi settings.
3. ODIN will now reboot and try
to establish Wi-Fi connection. If
successful ODIN will say: “Your device
is now connected”.
Note: If a Wi-Fi connection cannot be
established ODIN will return to the
previous state
Wi-Fi Sharing (iOS Device):
10

Clint ODIN Specifications

General

Speaker type	-
Number of drivers	2
Number of speakers	1
Audio output channels	2.0 channels
Amplifier class	D
Impedance	- Ω
Frequency range	- Hz
RMS rated power	50 W
AUX in	Yes
Bluetooth	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Product type	Stereo portable speaker
Product color	Gray
Recommended usage	Universal
Audio formats supported	AAC, AAC+, AIFF, FLAC, MP3, OGG, WAV, WMA
Power source type	AC
AC adapter input voltage	100 - 240 V
Power consumption (standby)	0.5 W
MP3 bit rates	- Kbit/s
Package weight	8190 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Width	350 mm
Height	570 mm
Weight	6780 g