Name: Clinton Electronics CE-M10A
Brand: Clinton Electronics
Rating: 5 (1 reviews)

To Next Page

To Previous Page

OSD Menu | Image Modes | Audio

LOGO

Motion VOV SD- Displays SD Card content full

screen. Live camera image will display in VOV

window when motion is sensed.

From the sub-menu, select the number of seconds

VOV window will remain on screen after motion

is sensed, as well as the VOV window size and

position.

SD-Video- Displays the SD Card content full screen. Camera’s video signal will continue to

output to an attached DVR or secondary display.

LOGO

Sub Menu Selections:

Motion Dwell Time- Set number of seconds

live camera image will remain on screen

after motion is sensed.

Motion- Displays SD Card content full screen. Switches to full screen live video when

motion has been sensed.

Audio

• Volume: Raise or Lower the volume for the SD Card content and chime. Alternatively, you

can use the volume buttons on the remote control to set volume level.

• Output: Choose the audio output signal (SD-Audio, Chime). Selecting Chime will play the

noise when motion is triggered. Note: Under the “Display” menu, “Image Mode” must be set

to a motion mode for Chime to play.

Questions and Answers:

Need help?

Do you have a question about the Clinton Electronics CE-M10A and is the answer not in the manual?

Clinton Electronics CE-M10A Specifications

General