25
4 - Pull the insulating layer down
5 - AERAULIC CONNECTIONS
5 - Pull the sheath down
6 - Tighten well using the strap
Air distribution box (can be inspected)
If there is enough space between the ceiling and the
box, the acoustic insulation can be further improved by
further covering the air distribution box.
Use soundproof material (low-density polyester fibre is
recommended).
Box
Plasterboard
Access trap door
Warning
During the installation, carefully close all the open
points of the aeraulic system as well as the intake/
supply grilles in order to prevent dust and debris from
the construction site from entering the pipes.
This way you can prevent the unit from clogging when
it is started for the first time and also avoid any
additional costs for the cleaning of the aeraulic system
and the unit.
AIRJET supply diffuser + extraction valve
The extraction valve must not be positioned on the
side facing the air supply.
Air distribution valve (VIEX)
The air distribution valve must not be positioned above
the bed, for example.
Adjust the valve so that the air supply does not exceed
30m
3
/h.
To Next Page
Loading...
