53
9 - MAINTENANCE
CLEANING
1
2
3
4
5
Filters and inlets/outlets must be cleaned to ensure
optimal operation of the system.
Visually inspect the level of clogging.
The device should be visually inspected frequently and
cleaned at least every 6 months.
Check the filter: replace if very dirty or wash it with
water
To clean:
• clean in tepid water with common detergent.
• rinse thoroughly in running water to avoid spillage
into the served area.
• dry
Alternatively:
• blowing or vacuuming
Outlet grille
Replacement of inlet filter (VIEX)
Replacement of rectangular grille filter (GINOX-GIVEX)
Square grille metal filter (GQIEX)
To Next Page
Loading...
