35
8 - CONTROL
MODE:
heating
cooling
auto
ventilation
OFF: unit off
Ambient temperature, detected by probe T1.
When adjusting the temperature, indicates the setpoint.
COMPRESSOR: indicator on when the compressor is running.
DEFROSTING: indicator on when the unit is defrosting
HUMIDITY CONTROL: indicator on when the unit is in cooling and the compressor is
running.
TIMER: indicator on when a valid timer has been set (weekly schedule).
ALARM: indicator on when a fault occurs or a protection device intervenes.
Indicates information specific to a fault or protection in progress.
LOCK: indicator on when the controller’s keypad is locked.
SILENT: indicator on with unit in silent mode
COMFORT: indicator on when the unit is in cooling / heating / auto mode and the
compressor is running.
Utdoor temperature
To Next Page
Loading...
