CLIVET MSAN-XMI 80M Series - User Manual

M0MA40P16-02- 11/21
OUTDOOR UNIT
MINI VRF
MSAN-XMi 80M-160M / 120T-180T series
INSTALLATION MANUAL
USE AND MAINTENANCE
MSAN-XMi 400T-450T
MSAN-XMi 20
0T-
260T

CLIVET MSAN-XMI 80M Series Specifications

General

Brand	CLIVET
Model	MSAN-XMI 80M Series
Category	Air Conditioner
Language	English

Summary

Introduction and Product Series

Series Identification

Identifies the product series and its VRF systems.

Manual Symbols and Meanings

Explains symbols used in the manual for clarity and safety.

Product Warranty Information

Outlines the warranty terms and conditions for the product.

General Information and Safety

General Safety and Warning Rules

Provides crucial safety instructions for installation and operation.

Critical Danger Warnings

Highlights critical warnings about potential dangers and necessary precautions.

Prohibited Actions

Lists actions that must not be performed to ensure safety and product integrity.

Fluorinated Gas Information

Provides important information regarding the use and handling of fluorinated gases.

System Component Descriptions

Details the various parts and components of the outdoor unit system.

Included Accessories

Lists and describes the accessories included with the unit.

Unit Identification

Explains how to identify the outdoor unit using its serial number label.

Preliminary Indications for System Setup

Outdoor;Indoor Unit Combinations

Details compatible combinations of outdoor and indoor units for system configuration.

Outdoor Unit Dimensions

Provides the physical dimensions of the outdoor units for installation planning.

System Operating Range

Specifies the climatic conditions under which the system operates optimally.

Connection Pipe Dimensions

Gives the dimensions for the refrigerant connection pipes.

Refrigerant Piping Lengths

Outlines maximum allowed lengths and height differences for refrigerant piping.

Installation Procedures

Installation Preliminary Warnings

Essential safety and procedural warnings before commencing installation work.

Unit Handling and Transport

Provides guidelines for safe transport, lifting, and handling of the outdoor unit.

Installation Area Clearances

Specifies required clearances for proper airflow and unit installation.

Climatic Condition Installation Requirements

Advises on installation adjustments for specific weather conditions like snowfall.

Unit Fixing Specifications

Details the requirements for securely mounting and fixing the outdoor unit.

Condensate Water Outlet

Explains the options and procedures for condensate water drainage.

Pipe and Power Line Outlet Options

Shows various possibilities for routing pipes and electrical cables.

Refrigerant Piping Installation

Refrigerant Piping Installation Guide

Provides guidelines and required equipment for installing refrigerant piping correctly.

Refrigerant Pipe Welding and Brazing

Details the correct methods for welding and brazing refrigerant pipes, including safety.

Refrigerant Piping Connections

Instructions for connecting the refrigerant piping to the outdoor unit.

Connecting Shut-off Valves

Explains the procedure for connecting and handling the unit's shut-off valves.

Stop Valve Usage and Closure

Details how to use and operate the stop valves for refrigerant control.

Refrigerant Pipe Sizing

Provides guidelines and tables for correctly sizing refrigerant pipes based on system capacity.

First Connection Method

Illustrates a method for connecting refrigerant piping with specific length requirements.

Second Connection Method

Details an alternative method for connecting refrigerant piping with different configurations.

Piping Lengths and Branch Joint Rules

Specifies limits for pipe lengths between joints and branch pipes.

Refrigerant Piping Kit Selection

Guides the selection of appropriate piping kits based on system configuration and capacity.

Refrigerant Piping Sizing Example

Illustrates a practical example of how to size refrigerant piping for a system.

Pipe Thermal Insulation

Explains the importance and method of insulating refrigerant pipes to prevent condensation.

Pipe Penetration Protection Methods

Details how to protect pipes passing through walls or combustible materials.

Electrical Connections Guide

Electrical Connections Preliminary Info

Essential safety and preliminary information for all electrical work.

Connecting the Power Supply Line

Instructions for connecting the main power supply cable to the unit.

Electrical Power Supply Specifications

Provides detailed specifications for power supply requirements for various models.

Communication Bus Network Installation

Details how to install and connect the communication bus network cables.

Communication Cable Shield Connection

Explains the proper method for connecting and earthing the communication cable shield.

Communication Wiring Method

Demonstrates the correct wiring procedures for connecting units via the bus network.

Outdoor Unit Electrical Wiring Diagrams

Illustrates wiring diagrams for outdoor unit connections for different power types.

Controller and System Connection

Shows how to connect units to a central controller or computer.

Starting Up the System

Refrigerant Pipe Flushing

Procedure for flushing refrigerant pipes with nitrogen to remove contaminants.

Refrigerant Gas Leak Testing

Instructions for performing a leak test on the refrigerant circuit using nitrogen.

System Vacuum Operation

Details the process of creating a vacuum in the system to remove moisture.

Refrigerant Charging Procedure

Steps for charging the system with R410A refrigerant after leak testing and vacuuming.

Calculating Refrigerant Charge

Explains how to calculate the additional refrigerant charge required for the system.

Refrigerant Safety and Leak Precautions

Covers refrigerant safety, concentration limits, and leak precautions.

Frequency of Refrigerant Leak Checks

Outlines the frequency and requirements for refrigerant leakage checks.

Start-up and Testing Procedures

Initial Start-up Preparations

Outlines the essential checks and preparations before performing the initial test run.

Pre-Test Checklist

A comprehensive checklist to ensure all installation and setup steps are completed correctly.

Performing the System Test

Procedures and considerations for conducting the system's operational test.

Correcting Post-Test Errors

Guidance on correcting errors identified during the test run.

System Commissioning Procedure

Instructions for commissioning the system and recording its operating status.

Automatic Indoor Unit Addressing

Step-by-step guide for automatically addressing indoor units within the system.

Special Functions and Controls

Dip-switch Configuration

Explains how to configure dip-switches for various operating modes and settings.

System Control Mode Parameters

Details the various operating modes and parameters displayed for system control.

System Control Mode Display Details

Continues the explanation of system control modes and display information for specific models.

Unit Error Code Reference

Lists and explains various error codes that may appear on the unit.

Forced Cooling Function Activation

Describes how to activate the forced cooling function using a specific button.

Unit Display Information Summary

Summarizes the information displayed on the unit's indicator for different models.

Maintenance Procedures and Troubleshooting

General Maintenance Safety and Precautions

Important safety warnings and general advice for performing maintenance.

Malfunctions and Operational Notes

Introduces common operating modes that may seem like malfunctions but are normal.

Cooling or Heating Capacity Issues

Discusses common causes and solutions for reduced cooling or heating performance.

Fan Operation Anomalies

Addresses issues related to fan speed, direction, and non-operation.

Unit Smells and Dirt Management

Explains causes of smells and the need for cleaning due to dust.

Specific Unit Operational Issues

Details specific operational problems like fan failure or hot air emission.

Maintenance for Long Downtime

Procedures for preparing the unit after a long period of inactivity.

Troubleshooting Operating Problems

A guide to identifying and resolving common operating issues and their causes.

Remote Control Troubleshooting

Troubleshooting steps for problems related to the remote control's functionality.

Product Disposal Guidelines

Waste Electrical and Electronic Equipment Disposal

Information on the proper disposal of electrical and electronic equipment.