CLIVET MSE-SC 65D User Manual

6 MSE-SC 65D-180F M43X41C6-03
2 Reception
You have to check before accepting the delivery:
•
That the unit hasn’t been damaged during transport
•
That the materials delivered correspond with that indicated on the transport document comparing the data with the identication label
positioned on the packaging.
In case of damage or anomaly:
•
Write down on the transport document the damage you found and quote this sentence: “Conditional acceptance clear evidence of
deciencies/damages during transport”
•
Contact by fax and registered mail with advice of receipt to supplier and the carrier.
Any disputes must be made within 8 days from the date of the delivery. Complaints after this period are invalid.
2.1 Storage
Observe external packaging instructions.
2.2 Handling
1. Verify unit weight and handling equipment lifting capacity.
2. Identify critical points during handling (disconnected routes, ights, steps, doors).
3. Suitably protect the unit to prevent damage.
4. Lifting bracket
5. Screw pin shackle.
6. Safety pin shackle.
7. Before starting the handling, make sure that the unit is stable.
8. Gradually bring the lifting belts under tension, making sure they are positioned correctly.
A. Protections
B. Lifting bracket

CLIVET MSE-SC 65D Specifications

General

Brand	CLIVET
Model	MSE-SC 65D
Category	Chiller
Language	English