4 BEFORE INSTALLING
Reception
You have to check before accepting the delivery:
That the unit hasn’t been damaged during transport
That the materials delivered correspond with that indicated on
the transport document comparing the data with the
identification label positioned on the packaging.
In case of damage or anomaly:
Immediately make a note of the found damage on the
transport document and write the wording: "Accepted subject
to checking due to evident shortages/damages due to
transport".
Contact by fax and registered mail with advice of receipt to
supplier and the carrier.
NOTE
Any disputes must be made within 8 days from the delivery.
Complaints after this period are invalid.
Storage
Respect the indications on the outside of the pack.
In particolar:
minimum ambient temperature -20°C
(possible components damages)
maximum ambient temperature +45°C
(possible safety valve opening)
maximum relative humidity 95%
(possible damages to electrical components
NOTE
The unit may not be tilted more than 15° during transport..
Removal of packaging
Be careful not to damage the unit.
Recycle and dispose of the packaging material in compliance with
local regulations.
Before any work read:
Chapter. MAINTENANCE SAFETY
WARNINGS FOR OPERATIONS ON
UNITS CONTAINING R32
Suitably protect the unit to prevent
damage.
spacer bar
To Next Page
Loading...
Need help?
General