Keypad remote connections
The keypad is wired on the unit.
It can be disassembled and installed remotely.
Maximum distance 40 m.
Power supplied by the unit.
Maximum distance 300 m.
Separate power supply
Power supply provided with the
unit.
Alarm signal - ALARM
The door is closed with alarmed unit.
The door is open with the unit functioning normally.
Functioning compressor signal - HL1
Connect the signal lamp as shown in the diagram.
External pump control - PUMP-N
In case of a unit supplied with no circulation pump, control the
external pump as shown in the diagram.
Us a contactor.
Anti-freeze heater control - KM1
Control the heater as shown in the diagram
Us a contactor.
XT1
Max current (RMS): 5A
220-240V ~ 50Hz
To Next Page
Loading...
Need help?
General