Setpoint
Number of parallel units (modular configuration)
Mode : cooling
Controller off
Weekly timer active
45%
Compressor use value
Compressor in operation
60%
Fan use value
Fan in operation
Pump in operation
Auxiliary electric heater in operation.
Manual antifreeze or defrosting in operation
Remote control: the unit is set from the keypad to be controlled by a remote terminal or
by a remote switch
Wired controller
SILENT mode.
Key lock
Timer on
Alarm: indicator on when there is a fault or a protection is tripped.
Units in modular configuration
The information displayed on ALL controllers refers to the MASTER unit.
To Next Page
Loading...
Need help?
General