ClonerAlliance ViewLite AV User Manual
4. During recording process, you can adjust the volume of CVBS or S-Video IN by pressing the volume increase/decrease button on
ClonerAlliance ViewLite AV or the Remote at any time.
5. Press the Rec/Stop button on ClonerAlliance ViewLite AV remote, check the status of storage indicators, when the LED turns to
solid blue, it indicates the videos have been saved.
6. You can playback the recorded files on ClonerAlliance ViewLite AV directly or on PC or on a smart TV.
Note: DO NOT remove the USB storage drive/TF card from ClonerAlliance ViewLite AV in the process of recording (Storage indicator
flashing Blue indicates it’s still in the process of recording.)
3.3 Take Snapshots
Method 1. Using the Remote included with ClonerAlliance ViewLite AV to take a snapshot.
Press on the remote control to take a snapshot.
Method 2. Using the snapshot button on ClonerAlliance ViewLite AV to take a snapshot. FYI. Image format: JPG
You can playback the snapshots on ClonerAlliance ViewLite AV directly or on PC or on smart TV.
3.3. Take Snapshots 20
To Next Page
Loading...