ClonerAlliance ViewLite AV - Playback Recorded Files; Direct Playback on Device

To Next Page

To Previous Page

HOW TO PLAYBACK THE RECORDED FILES ON

CLONERALLIANCE VIEWLITE AV?

4.1 Playback the Recorded files on ViewLite directly

• Connect

1. Plug the USB storage device or TF card into the “Storage”port of ClonerAlliance ViewLite AV.

2. Plug the power adapter into the power socket and plug the other end into the 5V/1A port of ClonerAlliance ViewLite AV.

Note:

If you use a TV for monitoring during recording videos and you want to playback the recorded files on the TV after recording, please

note that the LCD screen of ClonerAlliance ViewLite AV will remain off in the whole process, this is normal and does not indicate a

defective unit. The videos can be played either on the screen of ClonerAlliance ViewLite AV or on the TV when these two devices are

connected. It can NOT display on both at the same time.